Faculty Publications
Journal Publications
Research Papers Publication in Journals (Year 2022-23)
Sr. No |
Faculty |
Title Of The Paper |
Journal |
Publisher |
DOI |
Index Type |
1 |
10439: Dattatray Bapu Hulwan |
Performance Testing Of Multicylinder Compressed Ignition Engine With Dual Fuel Mode Of Cng With Biodiesel And Diesel |
International Journal Of Vehicle Structures |
Mechaero Foundation For Technical Research And Education Excellence |
Http//Www.Maftree.Org/Eja |
Scopus |
2 |
10439: Dattatray Bapu Hulwan |
Recent Advancements In Synthesis, Rheological Characterization, And Tribological Performance Of Vegetable Oil-Based Lubricants Enhanced With Nanoparticles For Sustainable Lubrication |
Journal Of Cleaner Production |
ELSEVIER |
Https://Doi.Org/10.1016/J.Jclepro.2022.134454 |
SCI |
3 |
10439: Dattatray Bapu Hulwan |
Investigating The Effect Of Compression Ratio On Operating Characteristics Of Compression Ignition Engine Fueled With Diesel Ricebran Biodiesel N Butanol Additive Blends |
Journal Of The Institution Of Engineers India Series E |
Institution Of Engineers |
Https://Link.Springer.Com/Article/10.1007/S40034-022-00264-2 |
Scopus |
4 |
10031: Sunil Dattatray Chougule |
Auto-Provoking Fire Suppression System |
European Chemical Bulletin |
European Chemical Bulletin |
0 |
Scopus |
5 |
10036:Prof. Patki Nitin Bhalchandra |
Experimental Analysis Of Ss Using Brass Electrode In Electric Discharge Machining |
Materials Today |
Elsevier |
NIL |
Scopus |
6 |
10037: Mahesh Vishnu Walame |
# Torsional Tuned Mass Damper System Parameter Identification With Experimental Method |
IEEE |
IEEE |
Https://Ieeexplore.Ieee.Org/Document/9853142 |
Scopus |
7 |
10037: Mahesh Vishnu Walame |
Influence Of Different Parameters On The Specific Wear Rate Of Ptfe Composites In The Steam Environment |
IOP Science |
IOP Science |
This email address is being protected from spambots. You need JavaScript enabled to view it. |
Scopus |
8 |
10037: Mahesh Vishnu Walame |
N Effect Of Fabricated Twin Roller Arrangement Of Chassis Dynamometer On Measurement Of Performance Parameters Of Electric Two Wheelers |
International Journal Of Recent Technology And Engineering (IJRTE) |
Blue Eyes Intelligence Engineering And Sciences Publication (BEIESP) |
Https://Www.Ijrte.Org/Portfolio-Item/E74290111523/ |
Others |
9 |
10037: Mahesh Vishnu Walame |
N Influence Of Different Parameters On Specific Wear Rate Of Ptfe Composites In The Steam Environment |
IOP Science |
IOP Science |
Https://Www.Researchgate.Net/Publication/366664162 |
Scopus |
10 |
10037: Mahesh Vishnu Walame |
N Torsional Tuned Mass Damper System Parameter Identification With Experimental Method |
IEEE |
IEEE |
Https://Ieeexplore.Ieee.Org/Document/9853142 |
Scopus |
11 |
10357: Rajkumar Kishor Bhagat |
Comparative Study Of Conventional And Generative Design |
IJRASET |
International Journal For Research In Applied Science And Engg Tech |
Www.Ijraset.Com |
Others |
12 |
10438: Shrinivas Pandurang Chippa |
N Issues Related To The Numerical Simulation Of Herringbone Grooved Journal Bearing Including Cavitation Condition |
Proceedings Of The Institution Of Mechanical Engineers, Part J: Journal Of Engineering Tribology |
SAGE |
Https://Doi.Org/10.1177/135065012110625 |
SCI |
13 |
10529: Ganesh Dattatraya Korwar |
"Kinematic Analysis Of Compliant Slider Crank Mechanism" |
GIS SCIENCE JOURNAL |
GIS SCIENCE JOURNAL |
0 |
Scopus |
14 |
10529: Ganesh Dattatraya Korwar |
Self Powered Mems Sensor System For Monitoring Of Ocean Parameters |
ICCAKM-2022 |
IEEE |
0 |
Scopus |
15 |
10563: Mangesh Bhaurao Chaudhari |
Design And Analysis Of Stabilizing Ambulance Stretcher |
Transactions Of The Indian National Academy Of Engineering |
Springer |
Https://Link.Springer.Com/Article/10.1007/S41403-022-00356-W |
Scopus |
16 |
10644: Shinde Sunil Shyam |
An Edge Blending To Enhance The Flow Over Double Delta Wing Configuration During Re-Entry |
IOP Conf. Series: Materials Science And Engineering |
IOP Conf. Series: Materials Science And Engineering |
Krishna Jaiswal Et Al 2022 IOP Conf. Ser.: Mater. Sci. Eng. 1272 012018 |
Scopus |
17 |
10644: Shinde Sunil Shyam |
Long Range Spy Robot With Night Vision |
Intof Innovative Research In Technology- |
IJIRT |
Www.Ijirt.Com |
Others |
18 |
10644: Shinde Sunil Shyam |
Heat Transfer In Triangular Fins |
International Journal Of All Research Education And Scientific Methods |
International Journal Of All Research Education And Scientific Methods |
Www.Ijaresm.Com |
Others |
19 |
10644: Shinde Sunil Shyam |
Design Of Orthosis To Assist Patients With Wrist Fracture |
International Journal Of Innovative Research In Technology |
IJIRT |
Www.Ijirt.Com |
Others |
20 |
10754: Sachin Prabhakar Komble |
Numerical Model For Solar Drying Mechanism Of Grapes Using Double Glazed Cabinet Type Solar Dryer |
Journal Of Food Process Engineering |
Wiley |
Www.Onlinelibrary.Wiley.Com |
SCI |
21 |
10754: Sachin Prabhakar Komble |
Design And Investigation On Rain Saucer: The Technique Of Roofless Rainwater Harvesting |
Materials Today Proceedings |
Elseveir |
0 |
Scopus |
22 |
10754: Sachin Prabhakar Komble |
Mathematical Modeling Of Drying Characteristics For Cylindrical Thompson Seedless Grapes Under Natural Convection |
Journal Of Food Process Engineering |
Wiley |
Www.Wiley.Com |
SCI |
23 |
10754: Sachin Prabhakar Komble |
Review On Challenges Of Electric Vehicle |
TIJER - INTERNATIONAL RESEARCH JOURNAL |
TIJER |
Www.Tijer.Org |
Others |
24 |
10754: Sachin Prabhakar Komble |
Topology Optimization Of Bell Crank Lever |
TIJER - INTERNATIONAL RESEARCH JOURNAL |
TIJER |
Www.Tijer.Org |
UGC Care |
25 |
11224: Umesh Somalu Chavan |
A Global Scenario Of Sustainable Technologies And Progress In A Biodiesel Production |
Biodiesel Technology And Applications |
Wiely-Scrivener Publishing LLC |
Https://Onlinelibrary.Wiley.Com/Doi/Book/10.1002/9781119724957 |
Scopus |
26 |
11224: Umesh Somalu Chavan |
Hierarchical Ultrathin Nanosheet Of Ni(Oh)2/Rgo Composite Chemically Deposited On Ni Foam For Nox Gas Sensors |
ES Materials And Manufacturing |
Engineered Science Publisher LLC |
Https://Www.Espublisher.Com/Journals/Articledetails/721 |
Scopus |
27 |
11224: Umesh Somalu Chavan |
Analysis For Effect Of Optimized Air Drag Braking System On The Drag Force Of Vehicle |
Elsevier Materials Today Proceedings |
Elsevier |
Na |
Scopus |
28 |
11224: Umesh Somalu Chavan |
Lithium Ion Battery Thermal Management By Using Heat Pipe Coupled And Liquid Cold Plate |
Materials Today Proceedings |
Elsevier |
Na |
Scopus |
29 |
11224: Umesh Somalu Chavan |
Development Of Compact Packaging Machine For Small Industries |
Journal Of Xidian University |
Journal Of Xidian University |
Https://Doi.Org/10.37896/Jxu17.2/051 |
Others |
30 |
11224: Umesh Somalu Chavan |
Plastic Zone Analysis Of Ss316l And Ti6al4v Materials Under Mixed Mode Loading Conditions- |
International Journal For Computational Methods In Engineering Science And Mechanics |
Taylor And Francis |
Https://Doi.Org/10.1080/15502287.2021.1992542 |
SCI |
31 |
11224: Umesh Somalu Chavan |
Nickel Hydroxide Nanosheets Grown On Nickel Foam For High Performance Supercapacitor Applications- |
Materials Technology |
Taylor |
Https://Doi.Org/10.1080/10667857.2021.1873636 |
SCI |
32 |
11224: Umesh Somalu Chavan |
Lithium Ion Battery Thermal Management By Using Coupled Heat Pipe And Liquid Cold Plate- |
Materials Today: Proceedings |
Elsevier |
Https:// Doi.Org/10.1016/J.Matpr.2022.10.185 |
Scopus |
33 |
11224: Umesh Somalu Chavan |
Investigation Of Effect Of Mass On Performance Of Suspension System Using Quarter Car Test Rig- |
3rd International Conference On Computational And Experimental Methods In Mechanical Engineering |
AIP Conference Proceedings |
Https://Doi.Org/10.1063/5.0101143 |
Scopus |
34 |
11224: Umesh Somalu Chavan |
Magnification Of Energy Transmission Ratio Using Miniature Cycloidal Gear Box For Humanoids- |
IOP Conf. Series: Materials Science And Engineering |
IOP Conf. Series: Materials Science And Engineering |
10.1088/1757-899X/1272/1/012017 |
Scopus |
35 |
11224: Umesh Somalu Chavan |
Design And Analysis Of Energy Efficient Wind Turbine Blades- |
IOP Conf. Series: Materials Science And Engineering |
IOP Conf. Series: Materials Science And Engineering |
10.1088/1757-899X/1272/1/012020 |
Scopus |
36 |
11224: Umesh Somalu Chavan |
Study Of Lcf Behaviour And Life Estimation Based On Modified Swt Model And Enhanced Strain Energy Density Of Ti–6al–4v Eli- |
IOP Conf. Series: Materials Science And Engineering |
IOP Conf. Series: Materials Science And Engineering |
Doi:10.1088/1757-899X/1272/1/012027 |
Scopus |
37 |
11224: Umesh Somalu Chavan |
Experimental Studies On Carbon Nanotube Strain Sensors- |
Materials Today: Proceedings |
Elsevier |
Https://Doi.Org/10.1016/J.Matpr.2023.03.383 |
Scopus |
38 |
10492: Laxmikant Dadarao Mangate |
Review On Antilock Breaking System |
YMER |
YMER |
Http://Ymerdigital.Com/Current-Issue/ |
Others |
39 |
10492: Laxmikant Dadarao Mangate |
Development Of Livestock Healthcare Management System Using Heartbeat Sensor And Temperature Sensor |
YMER |
YMER |
Http://Ymerdigital.Com/Current-Issue/ |
Others |
40 |
10492: Laxmikant Dadarao Mangate |
Energy Harvesting From Speed Breaker |
YMER |
YMER |
Http://Ymerdigital.Com/Current-Issue/ |
Others |
41 |
10492: Laxmikant Dadarao Mangate |
Smart Water Quality Detection System |
YMER |
YMER |
Http://Ymerdigital.Com/Current-Issue/ |
Others |
42 |
10492: Laxmikant Dadarao Mangate |
Gesture Replication Robo Arm |
IJRASET |
IJRASET |
Https://Www.Ijraset.Com/Research-Paper/Gesture-Replication-Robo-Arm |
Others |
43 |
11220:Ketki Akshay Shirbavikar |
Portable Design Of An Automated Pneumatic Bending Machine |
YMER |
YMER |
Http://Ymerdigital.Com |
Others |
44 |
11220:Ketki Akshay Shirbavikar |
Study Of Variation Of Aspect Ratio Of Savonius Rotor |
YMER |
YMER |
Http://Ymerdigital.Com |
Others |
45 |
11220:Ketki Akshay Shirbavikar |
Design Of Centrifugal Pump |
IARJSET |
International Advanced Research Journal In Science, Engineering And Technology |
Https://Iarjset.Com/Issues/Volume-9-Issue-11-November-2022/ |
Others |
46 |
11220:Ketki Akshay Shirbavikar |
Review Of Home Automation Systems |
IARJSET |
Https://Iarjset.Com/Papers/Review-Of-Home-Automation-Systems/ |
Https://Iarjset.Com/Papers/Review-Of-Home-Automation-Systems/ |
Others |
47 |
11220:Ketki Akshay Shirbavikar |
Modelling And Analysis Of C-D Nozzle Using Cfd |
INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY |
INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY |
Https://Ijirt.Org/Master/Publishedpaper/IJIRT159600_PAPER.Pdf |
Others |
Research Papers Publication in Journals (Year 2021-22)
Sr. No |
Title of the publication |
First Author |
Co-Author(s) |
Name of the Journal |
Indexed in |
Date of publication |
Volume |
Edition No. |
ISBN/ ISSN//DOI |
1 |
Flow Characteristics and Novel Applications of Synthetic Jets – A Review |
J. Heat Transfer |
SCI |
May 31, 2021 |
Paper No: HT-21-1268 |
- |
|||
2 |
Plastic zone analysis of SS316L and Ti6Al4V materials under mixed mode loading conditions |
Patil, S |
Chavan, U., |
International Journal for Computational Methods in Engineering Science and Mechanics |
SCI |
28 Oct 2021 |
- |
||
3 |
Design and analysis of motion and energy-regulating vibration harvester |
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Science |
SCI |
, August 25, 2021 |
236 |
3 |
|||
4 |
NV Borse |
MA Sawant, SP Chippa |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
SCI |
December 22, 2021 |
- |
|||
5 |
Parametric exergy analysis of a Two-Stage vapour compression cycle for freeze desalination comparing eco-friendly refrigerants |
S. Pavitran |
Shrikant Jadhav, Suresh Gosavi |
International Journal of Exergy |
SCI |
2021-22 |
in press |
in press |
1742-8300 |
6 |
Investigation of heat transfer and fluid flow characteristics in straight and zigzag microchannels with water as working medium |
S. M. Gaikwad |
M.K. Nalawade |
International Journal of Ambient Energy |
SCI |
27 May 2021 |
DOI: 10.1080/01430750.2021.1924858
|
- |
DOI: 10.1080/01430750.2021.1924858
|
7 |
Design and Analysis of Wheelchair Based on Rocker‑Bogie Mechanism |
A. Kulkarni |
K. Dwivedi, R. Kulkarni, N. Mahale, G. Lohiya, M.Chaudhari |
Transactions of the Indian National Academy of Engineering |
Scopus |
9 November 2021 |
- |
||
8 |
Variable Runner Length Design, Simulation, and Optimization for FSAE Intake System |
S. Pavitran |
- |
International Journal of Automotive and Mechanical Engineering |
Scopus |
2021-22 |
in press |
in press |
ISSN: 2229-8649 (Print); 2180-1606 (Online) |
9 |
Analysis of Thermoelastohydrodynamic Lubrication of Journal Bearing including the Effect of Surface Roughness and Cavitation |
N. Baineni |
N. Borse, S. Chippa |
Journal of The Institution of Engineers (India): Series D |
Scopus |
- |
|||
10 |
Validation of Installation effects of an ultrasonic flow meter on butterfly valve using numerical analysis |
K.Kumar |
Sachin Komble, S Thorat, P Korgaonkar, V. Bartakke. P. Sonje, O. Chavan, K. Kavire |
Materials Today: Proceedings |
Scopus |
9th Aug 2021 |
46 |
15 |
ISSN 2214-7853 |
11 |
Design and Development of Lever Operated Wheelchair |
Aniket Vidyagar |
Ganesh D. Korwar, Sumedh Kulkarni, Nikhil Gund, Sreeraj Karpe, Somnath Hirole |
International Research Journal of Engineering and Technology (IRJET) |
- |
Jan 2022
|
9 |
1 |
|
12 |
On-road condition analysis of shock absorber using Arduino UNO |
Shinde Yashkumar |
Nishant Sardeshpande, Prasad Pund, Ojas Patil, Mangesh Chaudhari |
IJARIIT |
- |
2021-22 |
8 |
1 |
2454-132X |
13 |
Performance evaluation of bifacial modules on a tilted single axis tracker and comparison with static system |
Akshay Saraf |
D. B. Hulwan, Dr. Sudhir Muthyala |
Journal of Huazhong University of Science and Technology |
- |
October 2021 |
50 |
7 |
ISSN-1671-4512 |
14 |
Surface Water Garbage Collector |
S.Kannav |
U Chavan, S Karbelekar |
International Research Journal of Engineering and Technology |
- |
August 2021 |
8 |
8 |
ISSN: 2395-0072 |
15 |
Automated Onion Sapling Bot |
Prajwal Mondhe |
,Rushikesh Ubale, Nikhil Rathod,Kartik Batra, Ketki Shirbavikar |
International Research Journal of Engineering And Technology |
- |
January 2022 |
9 |
1 |
e-ISSN: 2395-0056 |
16 |
Design and analysis of power generation unit |
Yashpal Kondgule |
Pratiksha Kulkarni, Aayushi Kharat, Anand Malani, Mrunal Jondhale, Ketki Shirbavikar |
International Research Journal Of Engineering And Technology |
- |
January 2022 |
9 |
1 |
e-ISSN: 2395-0056 |
17 |
Evaluation of Design and Simulation of Gas Spring Testing of Old and New Grooving Machine and Load, Experimental |
Gadhave Shubham |
Chavan Umesh, Bhagat Rajkumar |
International Research Journal of Engineering and Technology (IRJET) |
- |
| Feb 2022 |
9 |
2 |
e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
18 |
Performance Performance Analysis of Tubular PEM Fuel Cell Models and Thermal Analysis of Base Model using Ethylene Glycol-Water Mixture as a Coolant |
Tejas Ambekar |
Prathmesh Amle, Durgesh Chandangole, Gopal Ghule, L. D. Mangate |
International Journal for Research in Applied Science & Engineering Technology (IJRASET) |
- |
Jan 2022 |
10 |
1 |
ISSN: 2321-9653 |
19 |
A review of amphibious robots |
Sunil Shinde |
Rohan Kulkarni, Kshitij Dwivedi, Atharva Nagarkar, Vivek Pawar, Sanjana Patil |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
- |
Feb 2022 |
12 |
1 |
ISSN (P): 2249–6890; ISSN €: 2249–8001 |
20 |
Kinematic Analysis of compliant slider Crank mechanism |
Ganesh..D. . Korwar |
- |
Research Square |
- |
August 10th, 2021 |
- |
- |
|
21 |
Photovoltaic Smart Agricultural Tool |
Yash Arun Mane |
Ajit Balasaheb Satpute , Aniket Ajit Suryawanshi , Mihir Purushottam Shinde, Sunil. D. Chougule |
IJERT |
- |
January 2022 |
11 |
1 |
ISSN: 2278-0181
|
22 |
Upgrading the performance of a six-cylinder CNG Engine with the induction of Turbocharger for HCV application |
Sumit A. Kadam |
Debjyoti Bandyopadhyay, Nishant S. Kulkarni, Sandeep D. Rairikar,S. S. Thipse |
International Journal of Current Engineering and Technology |
- |
July/Aug 2021 |
11 |
4 |
E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
|
23 |
Multi-objective Optimization with FEC Polar Code for Bandwidth Efficient Mobile Network Using Response Surface Methodology
|
Ganesh Dongre & |
SCI |
- |
- |
||||
24 |
Experimental Investigation on Laser-Processed Micro-Dimple and Micro-Channel Textured Tools during Turning of Inconel 718 Alloy |
Avadhoot Rajurkar |
Satish Chinchanikar |
Journal of Materials Engineering and Performance |
SCI |
17 January 2022 |
- |
- |
https://doi.org/10.1007/s11665-021-06493-7 |
Research Papers Publication in Journals (Year 2020-21)
Sr. No |
Title of the publication |
First Author |
Co-Author(s) |
Name of the Journal |
Indexed in |
Date of publication |
Volume |
Edition No. |
ISBN/ ISSN//DOI |
1 |
Experimental modal parameter identification and validation of cantilever beam |
Ishan Nadkarni |
Ritvik Bhardwaj, Stephen Ninan, S.P. Chippa |
Materials Today: Proceedings |
Scopus 0.304 |
14 August 2020 |
38 |
||
2 |
Using numerical simulation to investigate the effect of injection configurations over the scramjet performance
|
Girish Barpande |
Amarjit Singh, S. Pavitran |
Elsevier (Materials today: Proceedings) |
Scopus |
October 2020 |
|||
3 |
Using Numerical Simulation to Obtain Length of Constant Area Section in Scramjet Combustor |
G Barpande |
A Singh, S Pavithran |
SAE International Journal of Aerospace |
Scopus
|
March 2020 |
13 |
1 |
|
4 |
Transient elastohydrodynamic analysis of finite line contact under load impulse |
SP Chippa |
NV Borse |
Proc IMechE Part J: J Engineering Tribology |
SCI
1.397 |
October 25, 2020 |
235 |
8 |
DOI: 10.1177/1350650120967210 |
5 |
Design of cell spacing in lithium-ion battery module for improvement in cooling performance of the battery thermal management system |
Kumar Kirad |
Mangesh Chaudhari |
Journal of Power Sources
(Elsevier) |
SCI
|
30 September 2020 |
481 |
- |
ISSN: 0378-7753 |
6 |
All solid-state asymmetric supercapacitor based on Ni.Co layered double hydroxide and rGO nanocomposite deposited on Ni foam,Journal of Electrochemical Energy Conversion and Storage |
P. E. Lokhande |
U. S. Chavan |
J. Electrochem. En. Conv. Stor.
ASME |
SCI
1.845 |
August 2020
|
17 |
3 |
ISSN: 2381-6872 |
7 |
All Cyclic voltammetry behaviour modelling of fabricated nanostructured Ni(OH)2 electrode using artificial neural network for supercapacitor application |
P. E. Lokhande |
U. S. Chavan |
Proc IMechE Part C:J Mechanical Engineering Science, SAGE |
SCI
1.386
|
March 2020
|
234 |
13 |
ISSN: 0954-4062 |
8 |
Experimental investigations on wear properties of natural fibre composites for brake pad applications |
S.D. Gat |
U. S. Chavan |
International Research Journal of Engineering and Technology (IRJET) |
- |
May 2020 |
5 |
- |
e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
9 |
Experimental Investigation of solar Drying characteristic of graphs |
S.P. Komble |
G.N Kulkarni, C. M. Sewatkar |
Springers Proceedings in Energy |
Scopus |
18 October 2020 |
online |
|
Print ISBN: 978-981-15-5954-9
|
10 |
Design Modifications and Analysis of Excavator Boom |
Prathmesh Pudke, |
U. S. Chavan |
(IRJET) |
- |
Sep 2020 |
7 |
9 |
e-ISSN: 2395-0056
p-ISSN: 2395-0072 |
11 |
Nickel hydroxide nanosheets grown on nickel foam for high performance supercapacitorapplications |
U. S. Chavan |
P. E. Lokhande & Suraj Bhosale |
Materials Technology Advanced Performance Materials |
SCI |
15 Jan 2021 |
|
|
Taylor & Francis Group |
12 |
Automated Cleaning Tracking and Cooling System (ACTCS) for Solar Panel |
Ahmed Shah |
Dev Shah, Mohammed Ahsan Shaikh, Pawankumar Shelar, Bhushan Shrirame, Sachin Komble |
International Journal of Engineering Research & Technology (IJERT) |
- |
January-2021 |
Vol. 10 Issue 01, |
|
IJERTV10IS010088 |
13 |
CFD simulation of reciprocating compressor valves to improve the valve geometry |
Pradeep Patil |
Prof. D. B. Hulwan |
The journal of oriental research madras |
- |
JANUARY 2021 |
Vol. XCII-I |
|
ISSN : 0022-3301 |
14 |
Valve Design Change to Improve Volumetric Efficiency &COP of Refrigeration Piston Compressor |
Pradeep Patil |
D. B. Hulwan |
Journal of the Maharaja Sayajirao University of Baroda |
- |
2021 |
Volume-55 |
1 |
ISSN: 0025-0422 |
15 |
Cellulose-Derived Flame-Retardant Solid Polymer Electrolyte for Lithium-Ion Batteries |
S. B. Kale |
T. C. Nirmale, N. D. Khupse, B. B. Kale, M. V. Kulkarni, S. Pavitran, S. W. Gosavi |
ACS Sustainable Chemistry and Engineering |
SCI |
Jan 2021 |
9 |
4 |
|
16 |
Study of Mixed Mode Fracture Study of Friction Stir Welding of Aa2024 Aluminum Alloy Using Ansys |
Swapna Deshpande |
Ashish Mujumdar |
IJRAR |
- |
2021-06-26 |
8 |
2 |
- |
17 |
Application of Lattice Structure in Weight Optimization |
Ganesh D Korwar |
Akshay S. Bhinge |
International Journal for Research in Engineering Application & Management (IJREAM) |
- |
2020/8 |
Vol. 6,
|
5 |
- |
18 |
Human Energy Harvesting: A Review |
S.S.Arawade |
G.D. Korwar |
International Journal ofAdvanced Research in Science, CommunicationandTechnology(IJARSCT |
- |
2020/9 |
Vol. 9,
|
5 |
- |
19 |
Recent Trend in Biomechanical Energy Harvesting |
SS Arawade |
GD Korwar |
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT) |
- |
2020/11 |
Vol. 11,
|
2 |
|
20 |
Design of Electric Cycle (Complete Design and Analysis of 2 Electric Cyclce Models) |
Sunil D. Chougule, |
Kunal Kaul |
IJERT |
- |
-May 2021 |
Volume 10 |
5 |
ISSN (Online): 2278-0181 |
21 |
Investigation of effect of different geometric parameters on fundamental natural frequency of composite laminate plate |
Ashish N Gadhve |
Nishant S Kulkarni |
IOP Conf. Series |
Scopus |
Feb 2021 |
1057 |
1 |
DOI:10.1088/1757-899X/1057/1/012006 |
22 |
Investigating Effects of Geometrical Parameters of Arrowhead Shaped Auxetic Structure on Negative Poisson’s Ratio |
Shubham Nitinkumar Wani |
M. V. Walame |
International Research Journal of Engineering and Technology (IRJET) |
- |
May 2021 |
8 |
5 |
e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
23 |
Determination of Energy Absorption Capacity of Auxetic Hexagon Structure with Different Geometrical Parameters by Simulation and Experimentation |
Akshada Kamthe |
M.V. Walame |
International Research Journal of Engineering and Technology (IRJET) |
- |
June 2021 |
8 |
6 |
e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
24 |
Study of Effect of Change in Geometrical Parameters on Negative Poisson Ratio of Auxetic Honeycomb Structure |
Akshada Kamthe |
M.V. Walame |
IJRAR |
- |
June 2021 |
8 |
2 |
E-ISSN 2348-1269, P- ISSN 2349-5138 |
25 |
Cellular Arrowhead Shaped Auxetic Structure with Significantly Reduced Stress Concentration Effects |
Shubham Nitinkumar Wani |
M. V. Walame |
International Research Journal of Engineering and Technology |
- |
June 2021 |
8 |
6 |
ISSN: 2395-0056, p-ISSN: 2395-0072 |
26 |
Thermal modelling of laser surface micro-texturing: Investigation on effects of laser parameters on dimple-texture dimensions and aspect ratio |
Avadhoot Rajurkar |
Niranjan Deshmukh, Omkar Kolekar, Radhika Muley, Satish Chinchanikar |
Materials Today Proceedings |
Scopus |
May-2021
|
46 |
17 |
|
27 |
Performance study of dimple and channel textured tools during turning of Inconel-718 |
Avdhoot Rajurkar |
Satish Chinchanikar |
Materials Today Proceedings |
Scopus |
8 April 2021 |
46 |
17 |
|
28 |
Laser micro & nano surface texturing for enhancing osseointegration and antimicrobial effect of biomaterials: A review
|
Neelesh Sirdeshmukh |
Ganesh Dongre |
Materials Today Proceedings |
Scopus |
21 January 2021 |
44 |
1 |
|
29 |
Comparative Analysis of Dry-EDM and Conventional EDM in Machining of Hastelloy |
Apurva A Kulkarni |
, Dr. Ganesh Dongre , Ravi A Raut |
Turkish Journal of Computer and Mathematics Education |
Scopus |
5 April 2021 |
12 |
3 |
Research Papers Publication in Journals (Year 2019-20)
Sr. No |
Title of the publication |
First Author |
Co-Author(s) |
Name of the Journal |
Indexed in |
Date of publication |
Volume |
Edition No. |
ISBN/ ISSN/DOI |
1 |
Crashworthiness aspects of electric vehicle design |
A.B. Navale |
S.P.Chippa, D.A. Chougule, P.M. Raut |
International journal of crashworthiness |
0.58 SCIE Index |
30 Jan 2020 |
20 |
4 |
https://doi.org/10.1080/13588265.2020.1718462
|
2 |
Prediction of HVAC cool-down performance inside a minibus passenger cabin using CFD and its experimental validation |
Nikhil Mhetre |
Suraj Sathyanarayan, Manoj Diwan, Siddarth Kumar, D.B. Hulwan |
S-JPSET |
- |
20 July 2019 |
11 |
1 |
2229-7111,2454-5767 |
3 |
Mechanical properties of Banana fabric and Kenaffiber reinforced epoxy composite: Effect of treatment and hybridization |
Aniket A Terwadkar |
M V Walame |
International Journal of innovative technology and exploring engineering |
- |
August 2019 |
8 |
10 |
2278-3075 |
4 |
An experimental study of a multi-orifice synthetic jet with application to cooling of compact devices |
HarekrishnaYadav |
M.B. Chaudhari, Ajinkya Joshi, Amit Agarwal |
AIP-Advances |
1.579 Scopus |
9 December 2019 |
9 |
- |
|
5 |
State–of-the-art advancements in studies and applications of grapheme: a comprehensive review |
Pratik Walimbe |
M.B. Chaudhari |
Materials Today Sustainability |
24.372 Scopus |
December 2019 |
6 |
- |
|
6 |
Application of a Particle Damping Technique on Wind Turbine Rotor by Filling of 90 Percent Balls |
Santosh R Sandanshiv |
U.S. Chavan |
International Journal of Innovative Technology and Exploring Engineering (IJITEE) |
- |
September 2019 |
8 |
11 |
3020-3025 |
7 |
Effect of Particle Damping Technique on 1 kW Wind Turbine Blade using 3 mm Balls |
Santosh R Sandanshiv |
U.S. Chavan |
International Journal of Innovative Technology and Exploring Engineering (IJITEE) |
- |
September 2019 |
8 |
11 |
2494-2498 |
8 |
Vibration suppression effects on rotating wind turbine blade using a particle damping method |
Santosh R Sandanshiv |
U.S. Chavan |
VIBROENGINEERING PROCEDIA |
- |
November 2019 |
29 |
43-48 |
|
9 |
Effect of change in position of particle dampers on wind turbine blade for vibration suppression |
Santosh R Sandanshiv |
U.S. Chavan |
VIBROENGINEERING PROCEDIA |
- |
November 2019 |
29 |
32-42 |
|
10 |
Failure Analysis of Strap Joint |
Minakshee R. Shinde |
U.S. Chavan, Kishor P. Deshmukh |
International Journal of Innovative Technology and Exploring Engineering (IJITEE) |
- |
August 2019 |
8 |
10 |
2278-3075 |
11 |
Design, Analysis and Experimental Testing of Composite Leaf Spring for Application in Electric Vehicle |
Mayur D. Teli |
U.S. Chavan, Haribhau G. Phakatkar |
International Journal of Innovative Technology and Exploring Engineering (IJITEE) |
- |
July 2019 |
8 |
9 |
2278-3075 |
12 |
All solid-state asymmetric supercapacitor based on Ni.Co layered double hydroxide and rGO nanocomposite deposited on Ni foam |
U.S. Chavan
|
Journal of Electrochemical Energy Conversion and Storage |
1.515 (SCI INDEXED) |
January 2020 |
17 |
3 |
||
13 |
Surfactant free chemically deposited wheat spike-like nanostructure on Cu foam for supercapacitor applications |
U.S.ChavanSonal Deokar, MukulIngale,Suraj Bhosale, Subodh Kale, Akshay Kamte |
Materials Today: Proceedings |
0.694 Scopus |
August 2019 |
18 |
3 |
||
14 |
Materials and fabrication methods for electrochemical supercapacitor: Overview |
Electrochemical Energy Reviews |
Open Access 1. Chemical Abstracts Service (CAS), EBSCO Discovery Service, Google Scholar
|
December 2019 |
3 |
- |
|
||
15 |
Effect of Epoxy Glass Fiber Reinforcement on Dynamic Characteristics of Sheet Metal Structure |
Sankalp.U. Joshi |
Nishant.S.Kulkarni |
International Journal of Innovative Technology and Exploring Engineering (IJITEE) |
- |
August 2019 |
Volume-8 |
Issue-10 |
ISSN: 2278-3075, |
16 |
Near Dry Rotary Electrical Discharge Drilling of Al Metal Matrix Composites |
Pankaj Gaigole |
B. Rajiv |
Journal of Manufacturing Technology Reearch |
- |
2019
|
Volume-11 |
Issue-2 |
ISSN: 1943-8095 |
Book Chapters
Sr. No. |
Book Title |
Chapter number and Name |
First Author |
Co-authors
|
Publisher |
Publication Year |
ISBN/ISSN No/DOI |
1 |
Biodiesel Technology and Applications |
A Global Scenario of Sustainable Technologies and Progress in a Biodiesel Production |
M. B. Kumbhar |
P. E. Lokhande, U. S. Chavan, V.G. Salunkhe |
Scrivener Publishing LLC |
18 June 2021 |
Print ISBN:9781119724643 |Online ISBN:9781119724957 |DOI:10.1002/9781119724957 |
2 |
Flexible Supercapacitor Nanoarchitectonics |
11. New-generation materials for flexible supercapacitors |
P.E. Lokhande |
U.S. Chavan, Suraj Bhosale, Amol Kalam, Sonal Deokar |
Scrivener Publishing LLC |
7 May 2021 |
Print ISBN:9781119711452 |Online ISBN:9781119711469 , DOI:10.1002/9781119711469 |
3 |
Advances in Energy Research |
Copper oxide Synthes on CU foam by chemical bath deposition with surfactant for supercapacitor |
Prasad Lokhande
|
Umesh S. Chavan, S. V. Deokar, Mukul Ingale, Himanshu Khadase
|
Springer Proceedings in Energy
|
DOI:10.1007/978-981-15-2666-4_34
|
|
4 |
Conducting Polymer based energy storage devices |
7. Conducting polymer derived materials for supercapacitor |
P.E. Lokhande |
U.S. Chavan |
Taylor and Francis |
Dec 2019 |
eBook ISBN 9780429202261 |
Research Papers Publication in Conferences (2022-23)
Sr. No. |
Faculty |
Title of the paper |
Journal |
Publisher |
DOI |
Index type |
1 |
10439: DATTATRAY BAPU HULWAN |
Performance Testing of Multicylinder Compressed Ignition Engine with Dual Fuel Mode of CNG with Biodiesel and Diesel |
International Journal of Vehicle Structures |
Mechaero Foundation For Technical Research And Education Excellence |
http//www.maftree.org/eja |
Scopus |
2 |
10439: DATTATRAY BAPU HULWAN |
Recent advancements in synthesis, rheological characterization, and tribological performance of vegetable oil-based lubricants enhanced with nanoparticles for sustainable lubrication |
Journal of Cleaner Production |
ELSEVIER |
https://doi.org/10.1016/j.jclepro.2022.134454 |
SCI |
3 |
10439: DATTATRAY BAPU HULWAN |
Investigating the Effect of Compression Ratio on Operating Characteristics of Compression Ignition Engine Fueled with Diesel Ricebran Biodiesel n Butanol Additive Blends |
Journal of The Institution of Engineers India Series E |
Institution of Engineers |
https://link.springer.com/article/10.1007/s40034-022-00264-2 |
Scopus |
4 |
10031: SUNIL DATTATRAY CHOUGULE |
AUTO-PROVOKING FIRE SUPPRESSION SYSTEM |
European Chemical Bulletin |
European Chemical Bulletin |
0 |
Scopus |
5 |
10036:PROF. PATKI NITIN BHALCHANDRA |
Experimental Analysis of SS using Brass Electrode in Electric Discharge Machining |
Materials Today |
Elsevier |
NIL |
Scopus |
6 |
10037: MAHESH VISHNU WALAME |
# TORSIONAL TUNED MASS DAMPER SYSTEM PARAMETER IDENTIFICATION WITH EXPERIMENTAL METHOD |
IEEE |
IEEE |
https://ieeexplore.ieee.org/document/9853142 |
Scopus |
7 |
10037: MAHESH VISHNU WALAME |
Influence of Different Parameters on the Specific Wear Rate of PTFE Composites in the Steam Environment |
IOP science |
IOP science |
This email address is being protected from spambots. You need JavaScript enabled to view it. |
Scopus |
8 |
10037: MAHESH VISHNU WALAME |
N EFFECT OF FABRICATED TWIN ROLLER ARRANGEMENT OF CHASSIS DYNAMOMETER ON MEASUREMENT OF PERFORMANCE PARAMETERS OF ELECTRIC TWO WHEELERS |
International Journal of Recent Technology and Engineering (IJRTE) |
Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP) |
https://www.ijrte.org/portfolio-item/E74290111523/ |
others |
9 |
10037: MAHESH VISHNU WALAME |
N INFLUENCE OF DIFFERENT PARAMETERS ON SPECIFIC WEAR RATE OF PTFE COMPOSITES IN THE STEAM ENVIRONMENT |
IOP science |
IOP science |
https://www.researchgate.net/publication/366664162 |
Scopus |
10 |
10037: MAHESH VISHNU WALAME |
N Torsional Tuned Mass Damper System Parameter Identification with Experimental Method |
IEEE |
IEEE |
https://ieeexplore.ieee.org/document/9853142 |
Scopus |
11 |
10357: RAJKUMAR KISHOR BHAGAT |
COMPARATIVE STUDY OF CONVENTIONAL AND GENERATIVE DESIGN |
IJRASET |
International journal for research in applied science and engg tech |
www.ijraset.com |
others |
12 |
10438: SHRINIVAS PANDURANG CHIPPA |
N Issues related to the numerical simulation of herringbone grooved journal bearing including cavitation condition |
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology |
SAGE |
https://doi.org/10.1177/135065012110625 |
SCI |
13 |
10529: GANESH DATTATRAYA KORWAR |
"Kinematic Analysis of compliant slider Crank Mechanism" |
GIS SCIENCE JOURNAL |
GIS SCIENCE JOURNAL |
0 |
Scopus |
14 |
10529: GANESH DATTATRAYA KORWAR |
Self powered MEMS sensor system for monitoring of ocean parameters |
ICCAKM-2022 |
IEEE |
0 |
Scopus |
15 |
10563: MANGESH BHAURAO CHAUDHARI |
Design and Analysis of Stabilizing Ambulance Stretcher |
Transactions of the Indian National Academy of Engineering |
Springer |
https://link.springer.com/article/10.1007/s41403-022-00356-w |
Scopus |
16 |
10644: SHINDE SUNIL SHYAM |
An Edge Blending to Enhance the Flow Over Double delta wing configuration during re-entry |
IOP Conf. Series: Materials Science and Engineering |
IOP Conf. Series: Materials Science and Engineering |
Krishna Jaiswal et al 2022 IOP Conf. Ser.: Mater. Sci. Eng. 1272 012018 |
Scopus |
17 |
10644: SHINDE SUNIL SHYAM |
LONG RANGE SPY ROBOT WITH NIGHT VISION |
Intof Innovative research in Technology- |
IJIRT |
www.ijirt.com |
others |
18 |
10644: SHINDE SUNIL SHYAM |
Heat transfer in Triangular Fins |
International Journal of All Research Education and Scientific Methods |
International Journal of All Research Education and Scientific Methods |
www.ijaresm.com |
others |
19 |
10644: SHINDE SUNIL SHYAM |
Design of Orthosis to assist patients with wrist fracture |
International Journal of Innovative Research in Technology |
IJIRT |
www.ijirt.com |
others |
20 |
10754: SACHIN PRABHAKAR KOMBLE |
Numerical Model for Solar Drying Mechanism of Grapes Using Double Glazed Cabinet Type Solar Dryer |
Journal of Food Process Engineering |
Wiley |
www.onlinelibrary.wiley.com |
SCI |
21 |
10754: SACHIN PRABHAKAR KOMBLE |
Design and investigation on rain saucer: The technique of roofless rainwater harvesting |
Materials Today Proceedings |
Elseveir |
0 |
Scopus |
22 |
10754: SACHIN PRABHAKAR KOMBLE |
Mathematical modeling of drying characteristics for cylindrical Thompson seedless grapes under natural convection |
Journal of Food Process Engineering |
Wiley |
www.wiley.com |
SCI |
23 |
10754: SACHIN PRABHAKAR KOMBLE |
Review On Challenges of Electric Vehicle |
TIJER - INTERNATIONAL RESEARCH JOURNAL |
TIJER |
www.tijer.org |
others |
24 |
10754: SACHIN PRABHAKAR KOMBLE |
Topology Optimization of Bell Crank Lever |
TIJER - INTERNATIONAL RESEARCH JOURNAL |
TIJER |
www.tijer.org |
UGC Care |
25 |
11224: UMESH SOMALU CHAVAN |
A Global Scenario of Sustainable Technologies and Progress in a Biodiesel Production |
Biodiesel Technology and Applications |
Wiely-Scrivener Publishing LLC |
https://onlinelibrary.wiley.com/doi/book/10.1002/9781119724957 |
Scopus |
26 |
11224: UMESH SOMALU CHAVAN |
Hierarchical ultrathin nanosheet of Ni(OH)2/rGO composite chemically deposited on Ni foam for NOx gas sensors |
ES materials and Manufacturing |
Engineered Science Publisher LLC |
https://www.espublisher.com/journals/articledetails/721 |
Scopus |
27 |
11224: UMESH SOMALU CHAVAN |
Analysis for Effect of Optimized Air Drag Braking System on the Drag Force of Vehicle |
Elsevier Materials Today Proceedings |
Elsevier |
na |
Scopus |
28 |
11224: UMESH SOMALU CHAVAN |
Lithium ion battery thermal management by using heat pipe coupled and liquid cold plate |
Materials Today Proceedings |
Elsevier |
na |
Scopus |
29 |
11224: UMESH SOMALU CHAVAN |
Development of compact packaging machine for small industries |
Journal of Xidian University |
Journal of Xidian University |
https://doi.org/10.37896/jxu17.2/051 |
others |
30 |
11224: UMESH SOMALU CHAVAN |
Plastic zone analysis of SS316L and Ti6Al4V materials under mixed mode loading conditions- |
INTERNATIONAL JOURNAL FOR COMPUTATIONAL METHODS IN ENGINEERING SCIENCE AND MECHANICS |
Taylor and Francis |
https://doi.org/10.1080/15502287.2021.1992542 |
SCI |
31 |
11224: UMESH SOMALU CHAVAN |
Nickel hydroxide nanosheets grown on nickel foam for high performance supercapacitor applications- |
MATERIALS TECHNOLOGY |
Taylor |
https://doi.org/10.1080/10667857.2021.1873636 |
SCI |
32 |
11224: UMESH SOMALU CHAVAN |
Lithium ion battery thermal management by using coupled heat pipe and liquid cold plate- |
Materials Today: Proceedings |
Elsevier |
https:// doi.org/10.1016/j.matpr.2022.10.185 |
Scopus |
33 |
11224: UMESH SOMALU CHAVAN |
Investigation of Effect of Mass on Performance of Suspension System using Quarter Car Test Rig- |
3rd International Conference on Computational and Experimental Methods in Mechanical Engineering |
AIP Conference Proceedings |
https://doi.org/10.1063/5.0101143 |
Scopus |
34 |
11224: UMESH SOMALU CHAVAN |
Magnification of energy transmission ratio using miniature cycloidal gear box for humanoids- |
IOP Conf. Series: Materials Science and Engineering |
IOP Conf. Series: Materials Science and Engineering |
10.1088/1757-899X/1272/1/012017 |
Scopus |
35 |
11224: UMESH SOMALU CHAVAN |
Design and analysis of energy efficient wind turbine blades- |
IOP Conf. Series: Materials Science and Engineering |
IOP Conf. Series: Materials Science and Engineering |
10.1088/1757-899X/1272/1/012020 |
Scopus |
36 |
11224: UMESH SOMALU CHAVAN |
Study of LCF behaviour and life estimation based on modified SWT model and enhanced strain energy density of Ti–6Al–4V ELI- |
IOP Conf. Series: Materials Science and Engineering |
IOP Conf. Series: Materials Science and Engineering |
doi:10.1088/1757-899X/1272/1/012027 |
Scopus |
37 |
11224: UMESH SOMALU CHAVAN |
Experimental studies on carbon nanotube strain sensors- |
Materials Today: Proceedings |
Elsevier |
https://doi.org/10.1016/j.matpr.2023.03.383 |
Scopus |
38 |
10492: LAXMIKANT DADARAO MANGATE |
Review on Antilock Breaking System |
YMER |
YMER |
http://ymerdigital.com/current-issue/ |
others |
39 |
10492: LAXMIKANT DADARAO MANGATE |
Development of Livestock Healthcare Management System using Heartbeat Sensor and Temperature Sensor |
YMER |
YMER |
http://ymerdigital.com/current-issue/ |
others |
40 |
10492: LAXMIKANT DADARAO MANGATE |
Energy Harvesting From Speed Breaker |
YMER |
YMER |
http://ymerdigital.com/current-issue/ |
others |
41 |
10492: LAXMIKANT DADARAO MANGATE |
Smart Water Quality Detection System |
YMER |
YMER |
http://ymerdigital.com/current-issue/ |
others |
42 |
10492: LAXMIKANT DADARAO MANGATE |
Gesture Replication Robo Arm |
IJRASET |
IJRASET |
https://www.ijraset.com/research-paper/gesture-replication-robo-arm |
others |
43 |
11220:KETKI AKSHAY SHIRBAVIKAR |
Portable design of an automated Pneumatic bending machine |
YMER |
YMER |
http://ymerdigital.com |
others |
44 |
11220:KETKI AKSHAY SHIRBAVIKAR |
Study of variation of aspect ratio of Savonius Rotor |
YMER |
YMER |
http://ymerdigital.com |
others |
45 |
11220:KETKI AKSHAY SHIRBAVIKAR |
Design of Centrifugal Pump |
IARJSET |
International Advanced Research Journal in Science, Engineering and Technology |
https://iarjset.com/issues/volume-9-issue-11-november-2022/ |
others |
46 |
11220:KETKI AKSHAY SHIRBAVIKAR |
Review of Home Automation Systems |
IARJSET |
https://iarjset.com/papers/review-of-home-automation-systems/ |
https://iarjset.com/papers/review-of-home-automation-systems/ |
others |
47 |
11220:KETKI AKSHAY SHIRBAVIKAR |
Modelling and Analysis of C-D Nozzle Using CFD |
INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY |
INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY |
https://ijirt.org/master/publishedpaper/IJIRT159600_PAPER.pdf |
others |
Research Papers Publication in Conferences (2021-22)
Sr. No. |
Title of the publication |
First Author |
Co-Author(s) |
Name of the Conference |
National/ International |
Date of the conference |
Venue of conference |
|
|
|
|
|
|
|
|
1 |
A COMPARATIVE STUDY OF SLIDER BEARINGS WITH VARIOUS CONTACT GEOMETRY BASED ON NUMERICAL ANALYSIS |
Shraddha Shigare |
S.P.Chippa |
TRIBOINDIA 2021– An International Virtual Tribology Conference |
International |
02-04 December, 2021 |
Saintgits College of Engineering Kottayam, Kerala – 686532, India |
2 |
Solar Drying Characteristics of Grapes using a heat and mass transfer based mathematical Model |
S.P.Komble |
G. N. Kulkarni, C. M. Sewatkar |
ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC 2021) |
International |
17th to 20th December 2021 |
IIT Madras |
Numerical Investigation of Single Phase Heat Transfer and Fluid Flow Characteristics in Divergent Minichannels |
S.M.Gaikwad |
M.K.Nalawade |
26th National and 4th International ISHMT-ASTFE Heat and Mass Transfer |
International |
17th to 20th December 2021 |
IIT Madras |
|
4 |
Optimization of anti-vibration mounts for engine bed |
Pravin Hujare |
Deepak Hujare,Umesh Chavan |
17th International Conference on Vibration Engineering and Technology of Machinery VETOMAC – 2021
|
International |
December 16-18, 2021
|
B.M.S.College of Engineering, Bengaluru |
5 |
A numerical investigation for heat transfer enhancement of synthetic jet using different orifice geometry |
Omkar Gaonkar |
Mangesh Chaudhari |
International Conference on Hybrid Electric and Automotive Technologies (HEAT 2021) |
International |
29-30, October 2021.
|
PES University, Bangalore |
6 |
Investigation of Heat Transfer and Fluid Flow Characteristics in Straight and Divergent Wavy Minichannels with Water as Working Medium |
Sanjay Mahadev Gaikwad |
M K Nalawade |
48th National Conference on Fluid Mechanics and Fluid Power (FMFP) |
International |
December 27-29, 2021 |
BITS Pilani, Pilani Campus, RJ, India. |
7 |
Transient structural analysis of knuckle joint |
Arti Thombre |
Mahesh Kotkar, Darshan Kothawade, Ganesh D Korwar |
9 th National Conference on Recent Developments in Mechanical Engineering (RDME-2021) |
National |
2021/8/18 |
M.E.S . college of Engineering, pune |
8 |
Analysis of Camshaft Used in Two Cylinder Engine |
Arti Thombre |
Mahesh Kotkar, Darshan Kothawade, Ganesh D Korwar |
9 th National Conference on Recent Developments in Mechanical Engineering (RDME-2021) |
National |
2021/8/18 |
M.E.S . college of Engineering, pune |
9 |
Preparation of biological micro powder based epoxy composite with improved damping factor and investigation for application in a MEMS sensor packaging |
Nitin Satpute |
Atharva Joshi, Kaustubh Utpat, Nishant Kulkarni, h Dharam Buddhi, Siddharth Jabade, Preetam Selmokar, Umesh Chavan |
INTERNATIONAL CONFERENCE ON INTELLIGENT ENGINEERING AND MANAGEMENT (ICIEM-2022) |
International |
27-April-2022 to 29-April-2022 |
Amity University in London |
Research Papers Publication in Conferences (2020-21)
Sr. No. |
Title of the publication |
First Author |
Co- Author(s) |
Name of the Conference |
National/ International |
Date of the conference |
Venue of conference |
1 |
Analysis of thermoelastohydrodynamic lubrication of journal bearing including the effect of surface roughness and cavitation |
Nagarjuna Baineni1 |
N.V.Borse,
S.P.Chippa |
An International Virtual Conference on Tribology (TRIBOINDIA 2020) |
International |
10th - 12th December 2020 |
Online SRM Institute of Science and Technology, Kattankulathur, India, |
2 |
Validation of Valve Coefficients Using Experimentation and Numerical Analysis |
K. Kumar (Scientist ‘C’ Central Water & Power Research Station, Pune 411024, India) |
S. Komble , S. Thorat , P. Korgaonkar, V. Bartakke, P. Sonje, O. Chavan, K. Kavire |
3rd International Conference on Futuristic Trends in Materials and Manufacturing. |
International |
7-8 Apr 2021 |
Online Guru Gobind Singh Indraprastha University |
3 |
Nature of CSF based on Beating Time in Fibre Reinforced Cotton Rag |
S. Bhagwat, |
O. Karlekar, S. Padalkar, S. Chaudhari and K. Kulkarni, |
2020 IEEE Pune Section International Conference (PuneCon) |
International |
16-18 Dec. 2020 |
Pune, India |
4 |
Permanent Magnet Alternator for Electricity Generation in LHB Railway Coaches |
Sanika Gaykar |
Nilay Joshi, Chinmay Swami, Saloni Shinde, Tashi Kharat, Mangesh Chaudhari |
©2020 IEEE |
International |
2020 IEEE Pune Section International Conference (PuneCon) Vishwakarma Institute of Technology, Pune India. Dec 16-18, 2020 |
2020 IEEE Pune Section International Conference (PuneCon) Vishwakarma Institute of Technology, Pune India. Dec 16-18, 2020 |
5 |
Investigation of Effect of Mass on Performance of Suspension System Using Quarter Car Test Rig |
Arohi Yemde |
Pravin P Hujare,Deepak P Hujare,Umesh S Chavan Sandeep S Kore |
INTERNATIONAL CONFERENCE ON INTELLIGENT MECHANICAL SYSTEMS FOR INDUSTRY 4.0 [ICIMSI-2021] |
International |
20-21 FEB-2021 |
G H Raisoni College of Engineering and Mangement, Pune, India |
6 |
Thermal modelling of laser surface micro-texturing: Investigation on effects of laser parameters on dimple-texture dimensions and aspect ratio
|
Avadhoot Rajurkar |
Niranjan Deshmukh, Omkar Kolekar, Radhika Muley, Satish Chinchanikar |
3rd International Conference on Materials, Manufacturing and Modelling ICMMM-2021 |
International |
March 19-21, 2021 |
VIT Vellore (Online) |
7 |
Effect of deposition strategies and printing parameters on dimensions and strength of 3D printed parts: a comparative analysis |
Avdhoot Rajurkar |
Dignesh Thesiya |
ICRADM-2020 |
International |
16th-17th July 2020 |
SVNIT,Surat Virtual Conference ICRADM 2020 |
8 |
Optimizing Tool Path Sequence Of Plasma Cutting Machine Using TSP Approach |
Ramkrishna Bharsakade |
Pankaj Gaigole, Shreeyash Sonawane |
International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020) |
International |
19-Aug-20 |
Virtual Conference, GRIET Hyderabad |
9 |
Lead Time Reduction for managing Engineering Changes |
Ramkrishna Bharsakade |
Avadhoot Rajurkar, Swapnil Kolapkar |
3rd International Congress on Advances in Mechanical Sciences (ICAMS 2020) |
International |
27-28 AUg 2020 |
Hyderabad |
10 |
An Indirect Approach to Analyse the Impact of Working Restrictions Due To COVID 19 on Muscle Fatigue |
Varsha Karandikar |
Prof. Anand Umrani |
E International conference on Socio-Economic and Health Challenges |
International |
22-Oct-20 |
Virtual Conference SEHCM - 2020 |
Research Papers Publication in Conferences (2019-20)
Sr. No. |
Title of the publication |
First Author |
Co- Author(s) |
Name of the Conference |
National/ International |
Date of the conference |
Venue of conference |
|
|
|
|
|
|
|
|
1 |
Thermo-hydrodynamic analysis of journal bearing including surface roughnesss |
N.V.Borse |
S.P.Chippa |
10th International conference on Industrial tribology (IndiaTrib-2019) |
International |
1 – 4 December 2019 |
IISc Banglore |
2 |
Transient elasto hydrodynamic analysis of finite line contact under load impulse |
S.P. Chippa |
N.V.Borse |
10th International conference on Industrial tribology (IndiaTrib-2019) |
International |
1 – 4 December 2019 |
IISc Banglore |
3 |
Effect of injection configuration scramjet performance |
Girish Barpande |
Amarjit Singh, S. Pavitran |
ICONAMMA 2019 |
International |
29th – 31st August, 2019. |
Amrita School of Engineering, Bangalore , India, |
4 |
Experimental investigation of Solar drying characteristics of grapes |
S.P. Komble |
- |
ICAER 2019 |
International |
10 - 12th December 2019 |
IIT Bombay |
5 |
Numerical investigation of heat transfer and fluid flow characteristic in wavy minichannels |
S M Gaikwad |
M K Nalawde |
3rd International ISHMT heat and mass transfer conference (IHMTC – 2019) |
International |
28 – 31 December 2019 |
IIT Roorkee |
6 |
Effects of Process parameter change in EDM of super alloys |
Ganesh Dongre
|
- |
ABMSAHT-2020 “Approaches and Benefits of Morden smart agriculture and Health sensing systems” |
National |
January 23-24, 2020
|
Sanjivani College of Engineering Kopargaon |
7 |
Throughput and Bot Error Rate Enhancement of Polar Code based OFDM HARQ System for DVB application in 5G
|
Ganesh Dongre
|
Makrand Jadhav
|
International Conference on Industry 4.0 Technology
|
International |
13-Feb to 15-Feb 20
|
VIT Pune
|
8 |
Integrated apple pludang and cutting of stalk mechanism
|
Ganesh Dongre
|
- |
ABMSAHT-2020 “Approaches and Benefits of Morden smart agriculture and Health sensing systems” |
National |
January 23-24, 2020
|
Sanjivani College of Engineering Kopargaon |
9 |
Simultaneous Optimization of Machining Process Parameters of Near-Dry Rotary EDM Using Grey Relational Analysis
|
Pankaj Gaigole |
B. Rajiv |
Optimising Methods in Engineering |
International
|
06-Jun-20
|
|
10 |
Analysis of Driving & Dependence Power of Factors Influencing Industry 4.0 Adoption in Healthcare |
Ramkrishna Bharsakade |
Padmanav Acharya, L. Ganapathy |
International Conference on Industry 4.0 Technology (I4Tech) |
International
|
13-Feb to 15-Feb 20
|
VIT Pune
|